GM ADJUSTABLE BALL JOINT

These heavy duty offset balljoints have a built in 3° offset which can be clocked to affect camber, caster, or both. They are ideal for vehicles which cannot be aligned properly with the factory cam bolts due to installation of a lift or leveling kit. As an additional benefit, they also raise the outer end of the upper control arm, which increases clearance between the arm and the droop travel stops on the frame. This restores droop travel on trucks with leveling kits, and eliminates NVH caused by arm to frame contact.

Adjustment Range: Camber/Caster ±3.00°
Installation Time: .6 hr/side
Required: 1 per wheel
Recommended Tools: LM72509 Ball Joint Press
Installation Instructions: Here

Applications
Chevy/GMC RWD/4WD: (with 8 lug wheels)
2001 - 06 1500 HD Crew Cab
1999 - 10 2500, 3500 Silverado, Sierra
2002 - 06 Avalanche 2500
2000 & Up Suburban 2500

Hummer 4WD: 2002 - 09 H2

Note: Due to strength limitations of the factory upper control arm, this ball joint should not be used on trucks with tires larger than 33" unless a "tall knuckle" lift kit is installed.